6-60
Using Various Functions > Functions
Image Repeat
Tiles the 1 copied sheet with an original image. You can also specify the area of the original to repeat.
Zoom Priority
Double Copy
Layout/Edit
Repeat an image of specified zoom ratio.
Copy two image.
Item Value Description
Off
Zoom
Priority
25 to 400% (in 1% increments) Set the default screen.
Use [+], [-] or the numeric keys to change the displayed
magnification as desired.
To set the area of the original to be repeated, select [Next >].
Specify
Repeat
Area
Off
On To set the area of the original to be repeated, select [On] for
"Specify Repeat Area".
Start Metric
*1
X1: 0 to 355 mm
Y1: 0 to 215 mm
Inch
X1: 0.00 to 14.01"
Y1: 0.00 to 8.49"
Use [+], [-] or the numeric keys to input the area of the original
to be repeated.
Y1: Length from top left of
platen to top edge of repeat
area
X1: Length from top left of
platen to left edge of repeat
area
Y2: Height of repeat area
X2: Width of repeat area
Area Metric
*1
X2: 1 to 356 mm
Y2: 1 to 216 mm
Inch
X2: 0.01 to 14.02"
Y2: 0.01 to 8.50"
Double Copy ― Makes 2 copies of the same original on a single sheet.
For example, you can double-copy an A5 original onto an A4
sheet which you then cut in half to make 2 copies that are
identical to the original.
To Next Page
Loading...
