Kyocera 408ci - Check the USB Drive Information; Removing USB Drive

5-69
Operation on the Machine > Operating using Removable USB Drive
5 Press the [Start] key.
The original is scanned and the data is stored in the USB drive.
Check the USB Drive Information
1
In the USB Drive screen, select [USB Info].
2
Once you confirm the information, select [Close].
Removing USB Drive
1
Display the screen.
[Home]( ) key > [USB Drive]
2
Select [Remove USB].
Select [OK], and remove the USB Drive after "USB Drive can be safely removed." is
displayed.
IMPORTANT
Be sure to follow the proper procedure to avoid damaging the data or USB drive.
NOTE
USB drive can also be removed after checking the Device Information.
Device Information (page 7-13)
Tapping the USB drive icon shown at the top of the touch panel and selecting [Remove
USB] allows you to safely remove the USB drive.
Home Screen (page 2-14)