Kyocera 408ci - Page 417

8-34
Setup and Registration (System Menu) > System Menu
Toner Save Level
(EcoPrint)
Select the default Toner Save Level (EcoPrint).
Value: 1 (Low) to 5 (High)
NOTE
Raising the level reduces toner consumption, but image quality falls.
Margin Default Set the default margin.
Value
Metric
Left/Right: -18 to 18 mm (in 1 mm increments)
Top/Bottom: -18 to 18 mm (in 1 mm increments)
Inch
Left/Right: -0.75 to 0.75" (in 0.01" increments)
Top/Bottom: -0.75 to 0.75" (in 0.01" increments)
Collate/Offset Set the defaults for Collate/Offset.
Value: Off, Collate On, Offset Each Page, Offset Each Set
Repeat Copy Select the Repeat Copy default.
Value: Off, On
NOTE
• This function will not be displayed when the Data Security Function is active.
• This function will not be displayed when Repeat Copy Job Retention is set to 0.
Trapping Select the default trapping level.
Value: Off, Light, Medium, Heavy
JPEG/TIFF Print Select the image size (resolution) when printing JPEG or TIFF file.
Value: Fit to Paper Size, Image Resolution, Fit to Print Resolution
XPS Fit to Page Set the default value for the XPS fit to page function.
Value: Off, On
Reserve Next Priority Specify whether the default screen appears when a subsequent copy job is reserved while
printing is in progress. To have the default screen appear, select [On].
Value: Off, On
Auto % Priority When a paper source of different size from the original is selected, select whether automatic
zoom (reduce/zoom) is performed.
Value: Off, On
Erase Shadowed
Areas (Copy)
Select the default Erase Shadowed Areas (Copy) setting.
Value: Off, On
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Scan extension kit(A) "OCR Scan Activation Kit"
(page 11-6)
Item Description