Kyocera 408ci - Page 404

8-21
Setup and Registration (System Menu) > System Menu
Operation Assist
[System Menu/Counter] key > [Device Settings] > [Operation Assist]
Error Handling
[System Menu/Counter] key > [Device Settings] > [Error Handling]
*1 Displayed only when the optional FAX Kit is installed.
*2 The registered favorite will be displayed.
*3 The running application will be displayed.
Item Description
Orientation Confirmation Select whether to display a screen for selecting the orientation of the originals to be
placed on the platen when using the following functions.
Original Orientation (page 6-24)
• Zoom (XY Zoom)
•Duplex
• Margin/Centering
• Border Erase
• Combine
• Memo Page
Value: Off, On
• Page #
• Staple/Punch (optional feature)
• 2-sided/Book Original
•Text Stamp
• Bates Stamp
Preset Limit Restrict the number of copies that can be made at one time.
Value: 1 to 9999 copies
Item Description
Duplexing Error Set what to do when duplex printing is not possible for the selected paper sizes and
media types.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Finishing Error Set alternative actions when finishing (Staple/Punch/Offset) is not available for the
selected paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
No Staple Error Set what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
Requires the optional Document Finisher.