8-30
Setup and Registration (System Menu) > System Menu
Secure Comm. Error
Log
Secure Comm. Error
Log
Select whether to record the secure communication error log
history.
Value: Off, On
If [On] is selected, set the number of histories to be stored. The
setting range is 1 to 1,000.
Auto Sending Select whether the secure communication error log history is
automatically sent to the set address when the number of entries
reaches the number set in "Secure Comm. Error Log".
Value: Off, On
This function is displayed when "Secure Communication Error
Log History" is set to [On].
Destination Set the destination to which secure communication error log
histories are sent. E-mail address only can be set as destination.
This function is displayed when "Secure Communication Error
Log History" is set to [On].
Subject Set the subject automatically entered when sending secure
communication error log histories by E-mail.
Value: Up to 256 characters
This function is displayed when "Secure Communication Error
Log History" is set to [On].
Item Description
To Next Page
Loading...
