Lenovo ThinkServer RD330 - Page 112

Page 112
MegaRAID SAS Software User GuideChapter 4: WebBIOS Configuration Utility
| Selecting SafeStore Encryption Services Security
Options
3. Select EKM in the Drive Security Choose mode wizard.
4. Click OK.
5. Click OK, the system asks you for a restart. The restart message appears as shown in
Figure71.
6. If you select LKM in Drive Security Choose mode wizard (Figure66), the screen
used to create a security key identifier appears, as shown in the following figure.
Figure 67: Enable Drive Security – Enter Security Key ID Screen
7. Accept the default security key ID or enter a new security key ID.
8. Click Next.
The Enable Drive Security – Enter Security Key screen appears as shown in
Figure68.