Page 113
MegaRAID SAS Software User Guide Chapter 4: WebBIOS Configuration Utility
| Selecting SafeStore Encryption Services Security
Options
Figure 68: Enable Drive Security – Enter Security Key
9. Enter a new drive security key or click Suggest to fill the new security key. Enter the
new drive security key again to confirm.
The security key is case-sensitive. It must be between eight and thirty-two
characters and contain at least one number, one lowercase letter, one uppercase
letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not
permitted.
10. Click Next.
The Enable Drive Security – Enter Pass Phrase screen appears as shown in Figure69.
You have the option to provide a pass phrase for additional security.
To Next Page
Loading...
