Lenovo ThinkServer RD330 - Page 366

Page 366
MegaRAID SAS Software User GuideChapter 11: Using MegaRAID® Advanced Software
| SafeStore Encryption Services
6. (Optional) Select the Pause for password at boot time check box.
If you choose this option, you have to enter the password whenever you boot the
server.
7. (Optional) Select the Enforce strong password security check box.
If you choose this option, make sure the password is between eight and thirty-two
characters and contain at least one number, one lowercase letter, one uppercase
letter, and one non-alphanumeric character (e.g. < > @ +). The space character is not
permitted. The password is case-sensitive.
8. (Optional) Enter a password in the Password field and then enter the same
password in the Confirm field, as shown in Figure254.
Warning messages appear if there is a mismatch between the characters entered in
the Password field and the Confirm field, or if there is an invalid character entered.
CAUTION: Be sure to record the password. If you lose the password, you could lose
access to your data.
Figure254 shows the password entered and confirmed on this screen.
Figure 254: Enable Drive Security - Password
9. Click Next.
The Confirm Enable Drive Security screen appears, as shown in Figure255, to show
the changes requested to the drive security settings.