Lenovo ThinkServer sd350 - Chapter 2: Configuration Information; EasyUpdate Firmware Updater; Using EasyUpdate Firmware Updater

HostedService=>/admin1/system1/sp1
Properties:
SystemCreationClassName=CIM_ComputerSystem
CreationClassName=CIM_ProtocolService
SystemName=IPMIController32
Name=SSHProtocolService
Protocol=2
MaxConnections=0
RequestedState=2
EnabledState=2
ElementName=SSHService
HealthState=7
Verbs:
cd
exit
help
show
version
start
stop
reset
•“exit”Verb
TheisusedtoexitfromtheSMASH-CLPsession.
Eg:Thecommand“exit”inthefollowingexamplewillterminatetheSMASH-CLPapplication.
->exit
CommandOK:COMMANDCOMPLETED
•“help”Verb
Theisusedtogetcontextsensitivehelp.Thefunctionalityisthesameasthe–helpoptionwiththe
additionofhelpfortargets.
Eg:Thebelowcommand“help”willdisplaytheusageoftheSMASH-CLPapplication.
->help
CommandStatus:COMMANDCOMPLETED
SMASHCLPisacommandlineinterfacefortheremoteusertotheserver.
Thecommandsareoftheformof<verb><options><targets><target-properties>
CommandsList:
cd
create
delete
dump
exit
help
load
reset
set
show
start
stop
version
Chapter1.TheLenovoThinkServersd350ServerType5493,LenovoThinkServern400EnclosureType549515