Lenovo ThinkSystem SR665 V3 - Remove a Heat Sink

Figure 130. Processor and heat sink components
1 Captive screws (6)
7 Processor contacts
2 Heat sink 8 Processor triangular mark
3 Processor identification label
9 Carrier triangular mark
4 Heat sink triangular mark 10 Processor carrier
5 Screw bolts (6)
11 Processor heat spreader
6 Retention frame triangular mark
12 Thermal grease
•
“Remove a heat sink” on page 176
• “Remove a processor” on page 179
• “Install a processor” on page 180
• “Install a heat sink” on page 182
Remove a heat sink
Follow instructions in this section to remove a heat sink. This task requires a Torx T20 driver.
176 ThinkSystem SR665 V3 User Guide