Lenovo ThinkSystem SR665 V3 - Remove a RAID Flash Power Module from the Chassis

Table 25. Location of RAID flash power modules
Figure 147. On the chassis
Figure 148. On standard air baffle
Figure 149. On GPU air baffle
Figure 150. On the 2.5-inch middle drive cage
• “Remove a RAID flash power module from the chassis” on page 190
• “Install a RAID flash power module on the chassis” on page 192
• “Remove a RAID flash power module from the air baffle” on page 194
• “Install a RAID flash power module on the air baffle” on page 195
• “Remove a RAID flash power module from the middle 2.5-inch drive cage” on page 196
• “Install a RAID flash power module on the middle 2.5-inch drive cage” on page 198
Remove a RAID flash power module from the chassis
Follow instructions in this section to remove a RAID flash power module from the chassis.
About this task
Attention:
• Read
“Installation Guidelines” on page 47 and “Safety inspection checklist” on page 48 to ensure that you
work safely.
190
ThinkSystem SR665 V3 User Guide