GPUs
This section provides cable routing information for GPUs.
Figure 268. GPU cable routing
From To
1 GPU power cable
1 Power connector on the riser 1
2 GPU power cable
2 Power connector on the riser 2
3 GPU power cable 3 GPU power connector on the system board assembly
If you need to install an M.2 backplane on the GPU air baffle, refer to below illustration for cable routing on
the air baffle. Route the GPU power cable from riser 2 beneath the M.2 backplane holder to the GPU power
connector on the GPU adapter.
Chapter 6. Internal cable routing 291
To Next Page
Loading...
