Lenovo ThinkSystem SR665 V3 - Security Bezel Replacement; Remove the Security Bezel

Figure 220. Installing the riser 3/4 assembly
Step 2. Connect cables to the riser card and PCIe adapter. See
Chapter 6 “Internal cable routing” on page
281
.
After you finish
Complete the parts replacement. See
“Complete the parts replacement” on page 279.
Demo video
Watch the procedure on YouTube
Security bezel replacement
Follow instructions in this section to remove and install the security bezel.
•
“Remove the security bezel” on page 245
• “Install the security bezel” on page 246
Remove the security bezel
Follow instructions in this section to remove the security bezel.
About this task
Attention: Read
“Installation Guidelines” on page 47 and “Safety inspection checklist” on page 48 to ensure
that you work safely.
Procedure
Chapter 5. Hardware replacement procedures 245