OCP interposer cards
This section provides cable routing information for the front and rear OCP interposer cards.
Note: The OCP interposer cards are not supported when the riser 3/4 cage is installed.
Figure 275. Cable routing for OCP interposer cards
From To
1 Front OCP interposer card: PWR 1 Rear OCP interposer card: PWR
2 Front OCP interposer card: MCIO 1, MCIO 2 2 Onboard: PCIe 9, PCIe 10, PCIe 11
3 Front OCP interposer card: F-SWIFT 3 Rear OCP interposer card: R-SWIFT
Chapter 6. Internal cable routing 297
To Next Page
Loading...
