Figure 42. Removing the front OCP interposer card
a. Loosen the screws that secure the front OCP interposer card.
b.
Lift the front OCP interposer card up off the front OCP cage.
After you finish
1. Install the new front adapter cage. See
“Install the front adapter cage” on page 86.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install the front adapter cage
Follow instructions in this section to install the front adapter cage, including the riser 5 cage at the top and
the front OCP cage at the bottom.
About this task
Attention:
• Read
“Installation Guidelines” on page 47 and “Safety inspection checklist” on page 48 to ensure that you
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
“Power off the server” on page 62.
86
ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
