Step 1. Use the key to unlock the security bezel.
Figure 221. Unlocking the security bezel
Step 2. Press the release latch 1 and rotate the security bezel outward to remove it from the chassis.
Figure 222. Removing the security bezel
After you finish
Note: Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Install the security bezel
Follow instructions in this section to install the security bezel.
About this task
Attention:
• Read
“Installation Guidelines” on page 47 and “Safety inspection checklist” on page 48 to ensure that you
work safely.
• Before you ship the rack with the server installed, reinstall and lock the security bezel into place.
Procedure
246 ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
