Processor interconnection cable routing
This section provides cable routing information for processor interconnection.
The following configurations do not support the processor interconnection cable:
• configurations with only one processor
• configurations with pure SAS/SATA front backplanes
Figure 292. Processor interconnection cable
From To
1 PCIe connectors 3 and 4 on the system board
assembly
1 PCIe connectors 2 and 1 on the system board
assembly
Note: Make sure that the cable is routed behind rubber
1 . Otherwise, the fan cage cannot be installed in
place.
Chapter 6. Internal cable routing 311
To Next Page
Loading...
