• Before you install a new processor, update your system firmware to the latest level. See “Update the
firmware” on page 467
.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sr665v3/downloads/driver-list/ to
see the latest firmware and driver updates for your server.
• Go to
“Update the firmware” on page 467 for more information on firmware updating tools.
Procedure
Step 1. (Optional) If a processor filler is installed on the processor socket, remove the processor filler.
Figure 135. Removing a processor filler
a. Gently open the retaining clip on each end of the memory module slots next to the left and
right sides of the processor.
b.
Grasp the processor filler with both hands and carefully lift it out of the slots.
Step 2. (Optional) Remove the processor socket cover.
The procedure of removing the processor socket cover is the same as that of removing a
processor. See
“Remove a processor” on page 179.
Step 3. Install the processor.
Figure 136. Installing a processor
Chapter 5. Hardware replacement procedures 181
To Next Page
Loading...
