Onboard connectors
The following shows the cable connections for the 8 x 2.5-inch SAS/SATA configuration with onboard
connectors.
To connect riser 3 and riser 4 cables when two processors are installed, see
“Riser 3/4 cage” on page 306.
To connect riser 5 cables when two processors are installed, see
“Riser 5 cage” on page 309.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Figure 295. Cable routing when two processors installed Figure 296. Cable routing when one processor installed
From To From To
1 Backplane 1: SAS 1 Onboard: PCIe 7 1 Backplane 1: SAS 1 Onboard: PCIe 9
8i/16i RAID/HBA adapter
The following shows the cable connections for the 8 x 2.5-inch SAS/SATA configuration with one 8i/16i
RAID/HBA adapter.
To connect riser 3 and riser 4 cables, see
“Riser 3/4 cage” on page 306.
To connect riser 5 cables, see
“Riser 5 cage” on page 309.
To connect cables to the front and rear OCP interposer cards, see
“OCP interposer cards” on page 297.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
314 ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
