NVMe cable routing
Figure 310. Cable routing when two processors installed
Figure 311. Cable routing when one processor installed
From To From To
1 Backplane 1: NVMe 6-7
1 Onboard: PCIe 7
1 Backplane 1: NVMe 6-7
1 Onboard: PCIe 2
8i RAID/HBA adapter
The following shows the cable connections for the front (6 x 2.5-inch SAS/SATA + 2 x 2.5-inch AnyBay)
configuration with one 8i RAID/HBA adapter.
To connect the processor interconnection cable when two processors are installed, see
“Processor
interconnection cable routing” on page 311
.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 323
To Next Page
Loading...
