Figure 315. SAS/SATA cable routing
Figure 316. NVMe cable routing
From To From To
1 Backplane 1: SAS
1 8i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 1: NVMe 6-7
1 Onboard: PCIe 3
Riser 3/4/5 + 8i RAID/HBA adapter
The following shows the cable connections for the front (6 x 2.5-inch SAS/SATA + 2 x 2.5-inch AnyBay)
configuration with riser 3, 4, and 5 and one rear 8i RAID/HBA adapter.
To connect riser 3 and riser 4 cables, see
“Riser 3/4 cage” on page 306.
To connect riser 5 cables, see
“Riser 5 cage” on page 309.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
326 ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
