NVMe cable routing
Figure 345. Cable routing when two processors installed
Figure 346. Cable routing when one processor installed
From To From To
1 Backplane 2: NVMe 0-1
1 Onboard: PCIe 6
1 Backplane 2: NVMe 0-1
1 Onboard: PCIe 2
2 Backplane 2: NVMe 2-3
2 Onboard: PCIe 8
2 Backplane 2: NVMe 2-3
2 Onboard: PCIe 1
3 Backplane 2: NVMe 4-5
3 Onboard: PCIe 9
3 Backplane 2: NVMe 4-5
3 Onboard: PCIe 9
4 Backplane 2: NVMe 6-7
4 Onboard: PCIe 10, 11
4 Backplane 2: NVMe 6-7
4 Onboard: PCIe 10, 11
Onboard connectors + CFF 16i RAID/HBA adapter
The following shows the cable connections for the front (8 x 2.5-inch SAS/SATA + 8 x 2.5-inch AnyBay)
configuration with one internal CFF 16i RAID/HBA adapter.
To connect the processor interconnection cable when two processors are installed, see
“Processor
interconnection cable routing” on page 311
.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
348 ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
