Onboard connectors + 8i RAID/HBA adapter + Retimer card
The following shows the cable connections for the front (8 x 2.5-inch AnyBay + 8 x 2.5-inch NVMe)
configuration with one 8i RAID/HBA adapter and one retimer card.
To connect the processor interconnection cable when two processors are installed, see
“Processor
interconnection cable routing” on page 311
.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
SAS/SATA cable routing
Figure 370. SAS/SATA cable routing to 8i adapter
From To
1 Backplane 1: SAS
1 8i adapter
• Gen 4: C0
• Gen 3: C0C1
Chapter 6. Internal cable routing 361
To Next Page
Loading...
