Middle/Rear backplane cable routing
Figure 413. Middle/Rear backplane cable routing
From To
1 Backplane 4: SAS 1 32i adapter: C3
2
• Backplane 5: SAS
• Backplane 6: SAS
2 8i adapter
• Gen 4: C0
• Gen 3: C0C1
3 Backplane 4: PWR
3 Onboard: 7mm power connector
4
• Backplane 5: PWR
• Backplane 6: PWR
4
• Onboard: rear backplane power
• Onboard: rear backplane sideband
• Riser 1: PWR
CFF expander + 8i/16i RAID/HBA adapter
The following shows the cable connections for the front 24 x 2.5-inch SAS/SATA + middle 8 x 2.5-inch SAS/
SATA+ rear 4 x 2.5-inch SAS/SATA configuration with one CFF expander and one 8i/16i RAID/HBA adapter.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 391
To Next Page
Loading...
