24 x 2.5" SAS/SATA + 4 x 2.5" SAS/SATA
This topic provides cable routing information for the server model with one front 24 x 2.5-inch SAS/SATA
expander backplane and one 4 x 2.5-inch SAS/SATA rear backplane.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Figure 468. Front/Rear backplane cable routing
From To
1 Backplane 4: SAS 1 Backplane 1: SAS 1
2 Backplane 1: SAS 0
2 8i adapter
• Gen 4: C0
• Gen 3: C0C1
3 Backplane 4: PWR
3 Onboard: 7mm power connector
24 x 2.5" SAS/SATA + 4 x 2.5" AnyBay
This topic provides cable routing information for the server model with one front 24 x 2.5-inch SAS/SATA
expander backplane and one 4 x 2.5-inch AnyBay rear backplane.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 433