Figure 471. Front backplane cable routing
Figure 472. Rear backplane cable routing
From To From To
1 Backplane 1: SAS 0
1 16i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 4: SAS 0,
SAS 1
1 16i adapter
• Gen 4: C1
• Gen 3: C2C3
2 Backplane 4: PWR 2 Riser 2: PWR1, PWR2
CFF 16i RAID/HBA adapter
The following shows the cable connections for the front 24 x 2.5-inch SAS/SATA + rear 8 x 2.5-inch SAS/
SATA configuration with one CFF 16i RAID/HBA adapter.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 435
To Next Page
Loading...
