Figure 493. Front/Middle backplane signal cable routing Figure 494. Middle backplane power cable routing
From To From To
1 Backplane 1: SAS 0,
SAS 1
1 16i adapter
• Gen 4: C0
• Gen 3: C0C1
1 Backplane 5: PWR
1 Onboard:
• GPU power
• Rear backplane power
• Rear backplane
sideband
2
• Backplane 1: SAS 2
• Backplane 5: SAS
2 16i adapter
• Gen 4: C1
• Gen 3: C2C3
12 x 3.5" SAS/SATA + 8 x 2.5" NVMe
This topic provides cable routing information for the front 12 x 3.5-inch SAS/SATA + middle 8 x 2.5-inch
NVMe configuration with one 16i RAID/HBA adapter.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Chapter 6
. Internal cable routing 449
To Next Page
Loading...
