Cable routing when one processor installed
Figure 508. SAS/SATA cable routing
Figure 509. NVMe cable routing
From To From To
1 Backplane 1: SAS 0,
SAS 1
1 Onboard: PCIe 9
1 Backplane 1: NVMe 8-9
1 Onboard: PCIe 2
2 Backplane 1: NVMe 10-
11
2 Onboard: PCIe 1
8i RAID/HBA adapter
The following shows the cable connections for the front (8 x 3.5-inch SAS/SATA + 4 x 3.5-inch NVMe)
configuration with one 8i RAID/HBA adapter.
Connections between connectors:
1 ↔ 1 , 2 ↔ 2 , 3 ↔ 3 , ... n ↔ n
Cable routing when two processors installed
To connect the processor interconnection cable when two processors are installed, see
“Processor
interconnection cable routing” on page 311
.
Chapter 6. Internal cable routing 457
To Next Page
Loading...
