Figure 44. Installing the OCP module
a. Push the OCP module into the slot until it is fully seated.
b.
Tighten the thumbscrew to secure the OCP module.
Step 4. Install the riser card and connect the cables to the riser card. See
Chapter 6 “Internal cable routing”
on page 281
.
Figure 45. Installing the riser card
a. Insert the riser card into the slots in the riser cage.
b.
Push the top of the riser card towards the riser cage so that the holes in the riser card
engage with the holes on the riser cage.
c.
Install the screws to secure the riser card into place.
Step 5. Install the PCIe adapter to the riser 5 cage.
88
ThinkSystem SR665 V3 User Guide
To Next Page
Loading...
