Linksys SPA9000

Linksys Voice System Administration Guide 172
Voice tab
AA script 1/2/3 AA script. See Chapter 4, Configuring the LVS Auto-Attendant, for the
complete syntax.
Default:
<aa><form id="dir" type="menu"> <audio src="prompt1" bargein=
"T"/> <noinput timeout="10" repeat="T"/> <nomatch repeat="F">
<audio src="prompt3" bargein="T"/> </nomatch> <dialplan src=
"dp1"/> <match> <default> <audio src="prompt2"/> <xfer name=
"ext" target="$input"/> </default></match> </form></aa>
Daytime AA To enable the daytime Auto-Attendant, select yes. Otherwise, select no.
Default: yes
Day Time Daytime hours for the daytime Auto-Attendant in 24-hour format. Enter
the start and end times in this format:
start=hh:mm:ss;end=hh:mm:ss (hh for hours, mm for minutes, and ss for
seconds).
For example, start=9:0:0;end=17:0:0 means that the start time is 9 AM
and the end time is 5 PM. The other hours (5 PM to 9 AM) are considered
nighttime hours.
If you do not enter start and end times, the whole day (24 hours) is
considered as daytime, so the nighttime Auto-Attendant is not used,
even if it is enabled.
DayTime AA Script Specifies which AA script (1, 2, or 3) is used for the AA treatment when
operating in daytime mode.
Default: 1
DayTime Answer Delay Number of seconds before the AA answers when operating in the
daytime mode.
Default: 12
Nighttime AA To enable the nighttime Auto-Attendant, select yes. Otherwise, select
no.
Default: no
NightTime AA Script Specifies which AA script (1, 2, or 3) is used for the AA treatment when
operating in daytime mode.
Default: 1
NightTime Answer Delay Number of seconds before the AA answers when operating in the
nighttime mode.
Default: 0
Weekend/Holiday AA To enable this Auto-Attendant, select yes. Otherwise, select no.
Default: no
Weekend/Holiday AA Script Specifies which AA script (1, 2, or 3) is used for the AA treatment when
operating in daytime mode.
Default: 1