Linksys SPA9000

Linksys Voice System Administration Guide 179
Voice tab
Voice tab > Regional page
Distinctive Ring/CWT Pattern Names section
CWT5 Cadence Cadence script for distinctive CWT 5.
Default: 1(.5/.5)
CWT6 Cadence Cadence script for distinctive CWT 6.
Default: 30(.1/.1,.3/.2,.3/9.1)
CWT7 Cadence Cadence script for distinctive CWT 7.
Default: 30(.3/.1,.3/.1,.1/9.1)
CWT8 Cadence Cadence script for distinctive CWT 8.
Default: 2.3(.3/2)
CWT9 Cadence Cadence script for distinctive CWT 9.
Default: 30(.3/9.7)
Ring1 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 1 for
the inbound call.
Default: Bellcore-r1
Ring2 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 2 for
the inbound call.
Default: Bellcore-r2
Ring3 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 3 for
the inbound call.
Default: Bellcore-r3
Ring4 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 4 for
the inbound call.
Default: Bellcore-r4
Ring5 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 5 for
the inbound call.
Default: Bellcore-r5
Ring6 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 6 for
the inbound call.
Default: Bellcore-r6
Ring7 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 7 for
the inbound call.
Default: Bellcore-r7
Ring8 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 8 for
the inbound call.
Default: Bellcore-r8
Ring9 Name Name in an INVITE’s Alert-Info Header to pick distinctive ring/CWT 9 for
the inbound call.
Default: Bellcore-r9