Linksys SPA9000

Linksys Voice System Administration Guide 178
Voice tab
Voice tab > Regional page
Distinctive Ring Patterns section
Voice tab > Regional page
Distinctive Call Waiting Tone Patterns section
Secure Call Indication Tone Played when a call has been successfully switched to secure mode. It
should be played only for a short while (less than 30 seconds) and at a
reduced level (less than -19 dBm) so it does not interfere with the
conversation.
Default: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone Played when a feature is implemented.
Default: 350@-16;*(.1/.1/1)
Ring1 Cadence Cadence script for distinctive ring 1.
Default: 60(2/4)
Ring2 Cadence Cadence script for distinctive ring 2.
Default: 60(.8/.4,.8/4)
Ring3 Cadence Cadence script for distinctive ring 3.
Default: 60(.4/.2,.4/.2,.8/4)
Ring4 Cadence Cadence script for distinctive ring 4.
Default: 60(.3/.2,1/.2,.3/4)
Ring5 Cadence Cadence script for distinctive ring 5.
Default: 1(.5/.5)
Ring6 Cadence Cadence script for distinctive ring 6.
Default: 60(.2/.4,.2/.4,.2/4)
Ring7 Cadence Cadence script for distinctive ring 7.
Default: 60(.4/.2,.4/.2,.4/4)
Ring8 Cadence Cadence script for distinctive ring 8.
Default: 60(0.25/9.75)
Ring9 Cadence Cadence script for distinctive ring 9.
Default: 60(.4/.2,.4/2)
CWT1 Cadence Cadence script for distinctive CWT 1.
Default: 30(.3/9.7)
CWT2 Cadence Cadence script for distinctive CWT 2.
Default: 30(.1/.1, .1/9.7)
CWT3 Cadence Cadence script for distinctive CWT 3.
Default: 30(.1/.1, .1/.1, .1/9.7)
CWT4 Cadence Cadence script for distinctive CWT 4.
Default: 30(.1/.1, .3/.1, .1/9.3)