Linksys SPA9000 - Page 184

Linksys Voice System Administration Guide 182
Voice tab
Call Back Deact Code Cancels a callback.
Default: *86
Call Back Busy Act Code Starts a callback when the last outbound call is busy.
Default: *05
Cfwd All Act Code Forwards all calls to the extension specified after the activation code.
Default: *72
Cfwd All Deact Code Cancels call forwarding of all calls.
Default: *73
Cfwd Busy Act Code Forwards busy calls to the extension specified after the activation code.
Default: *90
Cfwd Busy Deact Code Cancels call forwarding of busy calls.
Default: *91
Cfwd No Ans Act Code Forwards no-answer calls to the extension specified after the activation
code.
Default: *92
Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls.
Default: *93
Cfwd Last Act Code Forwards the last inbound or outbound calls to the extension specified
after the activation code.
Default: *63
Cfwd Last Deact Code Cancels call forwarding of the last inbound or outbound calls.
Default: *83
Block Last Act Code Blocks the last inbound call.
Default: *60
Block Last Deact Code Cancels blocking of the last inbound call.
Default: *80
Accept Last Act Code Accepts the last outbound call. It lets the call ring through when do not
disturb or call forwarding of all calls are enabled.
Default: *64
Accept Last Deact Code Cancels the code to accept the last outbound call.
Default: *84
CW Act Code Enables call waiting on all calls.
Default: *56
CW Deact Code Disables call waiting on all calls.
Default: *57
CW Per Call Act Code Enables call waiting for the next call.
Default: *71
CW Per Call Deact Code Disables call waiting for the next call.
Default: *70
Block CID Act Code Blocks caller ID on all outbound calls.
Default: *67
Block CID Deact Code Removes caller ID blocking on all outbound calls.
Default: *68