Page 9 of 88 TP1A072–3 English
Aug 2017
Linx 10 Operating Manual —
Printer user interface
Linx 10
See ‘Keyboard’ on page 26 for more information on how to set up primary and secondary
keyboards.
2.5 Printer screen brightness
To reduce power usage, the brightness of the printer display is reduced to 10% of its normal
level after 10 minutes if there is no touch screen activity (that is, activity occurs if the screen is
touched). Display brightness returns to normal if touch screen activity is detected, or a Fault or
Warning event occurs. When a Fault or Warning event occurs, the display appears at normal
brightness for 10 minutes, but then enters a ‘pulse’ mode (where the display alternates between
2% and 30% brightness).
To Next Page
Loading...
Need help?
General
