Page 63 of 88 TP1A072–3 English
Aug 2017
Linx 10 Operating Manual —
Add other fields
Linx 10
9 To set the time at which the shift begins, touch the Time button to display the Enter Shift
Start Time screen. For the ‘Daily’ example on page 60, the first start time is ‘06:00’.
Figure 59. Enter Shift Start Time screen
Enter the start time, and then touch the Save button to return to the Shift Entry screen.
NOTE: When you create a new Daily shift entry, the default time automatically
increments by 8 hours from the last entry in the list up to a time of 23:59 that same
day. When you create a Weekly shift entry, the default time automatically
increments by 8 hours from the last entry in the list. If necessary, this changes the
day of the shift item.
10 To enter the text for the shift code, touch the Text button to display the Enter Text screen.
For both examples, the text for the first item is “AAA”. Enter these letters without the
quotation marks, and then touch the Enter button to return to the Shift Entry screen.
11 Touch the Exit button to display the Shift List screen. The Shift List screen shows the
information you entered for the first item. The screen for the Daily shift cycle is as follows.
The title bar shows the number of shifts in the list.
Figure 60. Shift List screen: Daily shift code
89173
To Next Page
Loading...
Need help?
General
