Page 2 of 88 TP1A072–3 English
Aug 2017
Linx 10 Operating Manual —
Set up the printer
Linx 10
3 Message position—this step shows how to make sure that the message appears in the
correct position on the product (see ‘Print Delay’ on page 53 for more information).
4 Set up line—this step guides through how to set up a production line for the printer
(see ‘Line and message settings’ on page 38 for more information). It covers how to:
• Enter a name for the line.
• Select a method to measure the speed of the line.
• Set the type of event that triggers a print.
• Set the distance between the end of one message and the end of the next message.
• Set the direction in which the line travels.
• Set the height difference between the printhead and the printer.
When the above steps are complete, and you have commissioned the printer, you are now
ready to print your first message (see ‘Print your message’ on page 15).
To Next Page
Loading...
Need help?
General
