LOYTEC L-VIS User Manual

L-VIS User Manual 14 LOYTEC
Version 6.2 LOYTEC electronics GmbH
1 Introduction
1.1 What is L-VIS?
L-VIS is a highly flexible and easy to configure device to display and control data in
BACnet and CEA-709 networks. The L-VIS configuration software can be run as a
standalone program as well as an LNS
®
plug-in and supports the use of both static and
dynamic network variables in a project to allow easy integration in any kind of CEA-709
network.
The key features of the L-VIS device family are:
 Simple, graphical programming via the supplied configuration software.
 Support for alarming, scheduling and trending.
 Direct interface to one or more LINX automation servers via OPC XML-DA.
Available data points on the servers are easily imported for use in the LVIS
project from the corresponding LINX project files.
 Support for Modbus/TCP in master or slave mode and in parallel to OPC and the
control network interface (BACnet or CEA709, depending on the model).
 Support for international projects by using UCS-2 encoding, a character set
defined by the Unicode standard (ISO-10646), which covers the entire basic
multilingual plane (BMP) and allows text in any language to be displayed.

LOYTEC L-VIS Specifications

General

Brand	LOYTEC
Model	L-VIS
Category	Monitor
Language	English