L-VIS User Manual 276 LOYTEC
Version 6.2 LOYTEC electronics GmbH
management tool. It is recommended to synchronize the CPs from the device into the LNS
database before editing and writing them back.
To Synchronize CPs in NL220
1. Double-click on the device object in the device tree
2. Press the Upload button on the Configuration tab of the device properties (see Figure
36).
Figure 36: Configuration Tab for Configuration Properties in NL220.
To Synchronize CPs in LonMaker TE
1. Right-click on a device object and select Commissioning Resync CPs… from the
context menu.
2. This opens the dialog shown in Figure 37.
Figure 37: Set Configuration Properties in LonMaker TE.
To Next Page