100 HB V2.0/Dez-11 © 2011 LPKF AG
9.2 Storage
The circuit board plotter has to be stored in the covering box in a
cool and dry location.
Risk of injury due to heavy load!
The machine is heavy and bulky and cannot be transported or
lifted by one person!
Lift and transport the machine always with two persons.
■ Packaging the circuit board plotter
1. Place the covering box besides the work desk.
2. Open the box cover and take the unpacking instruction.
3. Follow the unpacking instruction step by step in reverse direction.
♦ Now the circuit board plotter is packed.
■ Storing the circuit board plotter
1. Select an adequate location (cool and dry) for storage.
2. Place the covering box on an euro pallet.
3. Transport the euro pallet with a lift truck to the storage location.
4. Protect the covering box with a foil or a suitable tarpaulin.
♦ Now the circuit board plotter is stored.
9.2.1 Disposal
Legal regulations and directives concerning disposal of electric
devices and machines have to be observed.
Dispose of the circuit board plotter must be done according to legal directives.
To Next Page
Loading...
