LPKF ProtoMat S - Operate

Operation
ProtoMat S
62 HB V2.0/Dez-11 © 2011 LPKF AG
6
6.2.3.3 Operate
Fig. 31: Operate
/1/ Start processing
/3/ Stop processing
/2/ Selection field \Phase\
/4/ Step and repeat
The input field has the following function:
No.
Description
/2/
Click on the selection field \Phase\ and select a processing phase.
The individual buttons have the following functions:
No.
Description
/1/
Click [Start processing] to start the complete machining process.
/3/
Click [Stop processing] to stop the current machining process.
/4/
Click [Step and repeat] to continue the machining process.
4
3
2
1