22 HB V2.0/Dez-11 © 2011 LPKF AG
Risk of injury by burning!
During the machining process the used tools and the collet
chuck heat up so that direct contact may cause burn-ups.
Use safety gloves and a pair of tweezers during manual
exchange of tools during operation.
Risk of injury due to sharp edges!
The employed tools are sharp-edged and cause cuts and stab
wounds whenever used improperly.
Always store the tools in their toolbox and protect the toolbox
against unauthorised usage.
Risk of injury by sudden cover closing!
The opened soundproof cover may close accidentally and jam
fingers or the complete hand.
Always lift the soundproof cover up to the latching position and
secure the machine against any shocks.
Risk of injury by instable underground!
An instable surface level can collapse and hurt the operator
during machining of a work piece due to vibrations and the
machine powers.
The machine must be placed on a solid surface.
To Next Page
Loading...
