• Be sure to check that the sliding door is locked in position
both when it is open and when it is closed.
• Always stop the machine on level ground when operating
or closing the door. If the door is opened or closed on a
slope, there is danger that the operating effort will
suddenly change. Do not open or close the door on
slopes.
• When opening or closing the door, always use door
handle (1) and knob (2).
• Be careful not to get your hands caught between the front
pillar or center pillar.
• If there is anyone inside the cab, call out to that person
before opening or closing the door.
[Door Lock]
When closing the door, pull the handle back to remove lock (3), and then pull the door to the front.
2.13 EMERGENCY ESCAPE HAMMER
• If it is necessary to break the window glass with hammer, be extremely careful not to injury
yourself on the flying pieces of broken glass.
• To prevent injury, remove the broken pieces of glass remaining in the frame before escaping
through the window. Be careful also not slip on the broken pieces of glass.
If it should become impossible to open the cab door for any reason,
and it is necessary to make an emergency escape from the
operator‟s compartment, uses hammer (4) to escape.
To escape from Operator‟s cab, use hammer (4) to break the glass
and escape through the window.
To Next Page
Loading...
