These monitor do not guarantee the condition of the machine.
Do not simply rely on the monitor when carrying out checks before starting (daily inspection).
Always get off the machine and check each item directly.
Displays basic items among the check before starting items that must be checked before starting the
engine. If there is any abnormality, monitor for the location of abnormality will light up.
(1) Engine oil level monitor
(2) Maintenance interval monitor
[1] ENGINE OIL LEVEL MONITOR
This monitor (1) warns the operator that the oil level in the engine
oil pan has dropped.
If oil level in the engine oil pan is low, the monitor lights up red, so
check the oil level, and add oil.
[2] MAITENANCE INTERVAL MONITOR
This monitor (2) lights up when the maintenance time gets close
and remains lit after the maintenance time has already passed.
• Lit yellow: The maintenance interval is due within 30 hours.
• Lit red: The maintenance interval has already passed.
This monitor (2) Lights up when starter switch is turned to the ON
position. It goes off after 30 seconds and display changes to the
Standard screen.
• For details of the method of confirming the maintenance interval , see “Operation 2.1.7 [3]
Maintenance Slector Switch”.
•If it is desired to change settings for the maintenance interval, have us or our sales service agent
change the settings.
To Next Page
Loading...
