• When carrying out inspection and maintenance inside the engine hood, always use the hood
support lever to hold the engine hood open.
• Always keep the engine hood locked except when opening it.
1. Release lock (1) of the engine hood.
For details, see “Operation 2.14 Cap with Lock [2] Opening and
Closing Covers with Lock”.
2. Locking can be released by pulling engine hood release lever
(2).
3. Pull up engine hood (3) and put engine hood support lever (4) in
the position to secure the engine hood.
4. When closing engine hood (3), lower engine hood support lever
(4) slowly to the sliding position and then lock the hood securely.
5. Do not forget to lock the engine hood.
2.16 CAB REAR COVER
• When carrying out inspection and maintenance inside the cover, always use the cover support
lever to hold the cover open.
• Always keep the cover locked except when opening it.
1. Release lock (1) of the cover.
For details, see “Operation 2.14 Cap with Lock [2] Opening and
Closing Covers with Lock”.
2. Pull knob (2) and open cover (3).
3. After opening the cover, set cover support lever (4) to hold the
cover in position.
4. When closing cover (3), set cover support lever (4) to the slide
position, and lower the cover slowly.
5. Do not forget to lock the cover.
To Next Page
Loading...
