Maeda LC1385M-8BF - Basic Operation of Machine Monitor

3-7
2.1.1 BASIC OPERATION OF MACHINE MONITOR
[1] STARTING ENGINE WHEN SITUATION IS NORMAL
• When the starter switch is turned to the ON position, the Opening screen GG is displayed.
• After the Opening screen GG is displayed for 2 seconds, the screen changes to the Check before
starting screen DD.
• After the Check before starting screen DD is displayed for 2 seconds, the screen changes to the Working
mode/Travel mode display screen HH.
• After the Check before starting screen DD is displayed for 2 seconds, the screen changes to the
Standard screen AA.
NOTES
When the engine is started, the battery voltage may suddenly drop depending on the temperature and
the battery condition. If this happens, the display on the machine monitor may momentarily go out, but
this does not indicate any abnormality.
[2] STOPPING ENGINE WHEN SITUATION IS NORMAL
• When the starter switch is turned to the OFF position, the Ending screen JJ is displayed for 5 seconds,
then on the display goes out.
AA: Standard screen JJ: Ending screen
GG: Opening screen
DD: Check before starting screen
HH: Working mode/Travel mode display screen
AA: Standard screen