Maeda LC1385M-8BF - Operations before Engine Starting

3-118
3.2 OPERATIONS BEFORE STARTING ENGINE
When starting the engine, check that the lock lever is
securely at the LOCK position.
If the lock lever is not locked securely and the control
levers or control pedals are touched when the engine is
started, the machine may move unexpectedly, and this may
lead to serious personal injury.
1. Check that lock lever (1) is at the LOCK position (L).
2. Check that each control lever and pedal is at the Neutral
position.
If the control levers and pedals are not being touched, they will
be at the Neutral position.
3. Insert the key in starter switch (2), turn the key to the ON
position, and then carry out the following checks.
• If a password has been set, the input display screen will be
displayed on the monitor screen.
After inputting the password, press Enter switch F6 (3).
NOTES
For details of the method of setting, changing, or canceling the
password, see separate “PROCEDURE FOR SETTING,
CHANGING OR CANCELING PASSWORD”.。