• When opening or closing the front winsow, bottom window, or door, always set the lock lever
to the LOCK positon. If the lock lever is at the FREE positon and the control levers or control
pedals are touched by mistake, this may lead to a serious accident.
• When opening or closing the front window, stop the machine on horizontal ground, stop the
engine, then carry out the operation.
• When opening the front window, hold the grip securely with both hands, pull up, and do not let
go until the automatic lock catch is locked.
• When closing the front window, the window will move quicker under is own weight. Hold the
grips securely with both hands when closing it.
• It is possible to stow (pull up) the front window in the roof of the operator‟s compartment.
[1] OPENING
1. Stop the machine on level ground, stow the crane completely,
then stop the engine.
2. Set lock lever (1) securely to the LOCK position (L).
3. Check the wiper blade is stowed in the right stay.
4. Hold 2 grips (A) on the left and right top sides of the front window,
and pull the 2 levers (B) to release the lock at the top of the front
window. The top of the front window will come out.
To Next Page
Loading...
