• When carrying out inspection and maintenance inside the door, always use the stopper to hold
the door open.
• Always keep the door locked except when opening it.
1. Release lock (1) of the door.
For details, see “Operation 2.14 Cap with Lock [2] Opening and
Closing Covers with Lock”.
2. Put finger in hook (2) and pull door (3) open.
3. Inset rod (4) in the groove to secure the door.
4. When closing door (3), pull up rod (4) and remove it from the
groove.
5. Do not forget to lock the door.
2.18 BATTERY ROOM DOOR
• When carrying out inspection and maintenance inside the door, always use the stopper to hold
the door open.
• Always keep the door locked except when opening it.
1. Release lock (1) of the door.
For details, see “Operation 2.14 Cap with Lock [2] Opening and
Closing Covers with Lock”.
2. Put finger in hook (2) and pull door (3) open.
3. Inset rod (4) in the groove to secure the door.
4. When closing door (3), pull up rod (4) and remove it from the
groove.
5. Do not forget to lock the door.