2-2
1. BASIC PRECAUTIONS
Failure to operate or maintain this machine properly can lead to serious personal injury or death. Be sure
to read this manual and each safety label thoroughly before performing operation or maintenance of this
machine and observe the safety precautions.
1.1 PRECAUTIONS FOR BEFORE STARTING OPERATION
OBSERVE THE MANUAL AND SAFETY LABELS
• Read well and understand this manual as well as the safety labels
labeled on various part of this Machine. Attempt to drive/operate
without understanding fully may result in wrong operation that may
cause personal or equipment accidents.
• Fully understand the proper use and inspection/maintenance
procedures, and exercise safe works.
• Make sure this manual and the safety labels labeled on various part
of this Machine are legible all the time.
Whenever illegibility or loss occurs, order from us or our sales
service agency and put the safety label back to the original location.
• Licenses or training certificates are necessary to drive this Machine.
Always obtain a license or training certificate before driving.
See “Introduction 4. Qualification for Operation” for details
• The drivers are requested to receive education and training in the handling methods and other
subjects from the applicable office, and obtain sufficient driving operation skills before work.
•Obey the instructions and signs given by the manager and work supervisor, and observe safety first
during the work.
• Obey the crane work basics during work.
• Before starting driving or work, always carry out the inspections first.
• Do not work under bad weather for instance strong wind, thunder or mist.
• Do not drive under any condition when you are overtired, have drunk alcohol or after taking a somnific
drug.
• Obey all of the workplace rules, safety regulations and operation method sequences during driving
operations and inspection/maintenance.
• Pay attention to surrounding conditions and pedestrians all the time when driving or working.
Whenever pedestrian approaches unwarily, abort working once, and take a measure such as issuing a
warning.
• When driving, be mentally prepared for unexpected situations so that you can take the appropriate
action immediately.
• Do not attempt any use outside of the capabilities and purposes described in this manual under any
circumstance.
• Observe the designated rated total load and work range when driving.
• Do not attempt inattentive driving, harsh driving or awkward operation under any circumstance.
• Pull out the key when leaving operation seat.
To Next Page
Loading...
