3-130
• Blade operation: LOWER (a) to/from RAISE (b)
19. Check that hydraulic oil temperature monitor (7) is displaying
the correct temperature.
If the hydraulic oil temperature monitor is not displaying the
correct temperature (it is displaying low temperature), repeat
Steps 7 to 10 until the display is the correct temperature.
• (A) Display when temperature is correct: Monitor background
(C) is blue.
• (B) Display when temperature is low: Monitor background (C)
is white.
If the hydraulic oil temperature monitor displays the correct temperature, the hydraulic equipment
warm-up operation is completed.
After confirming that the hydraulic oil temperature monitor displays the correct temperature, carry out the
following procedure.
To Next Page
